Jump to content
Setting up an AI agent? ReverseEngineering.wiki skill (works from the command line, no configuration): https://reverseengineering.wiki/skill/rewiki/SKILL.md · setup for every client, including MCP: https://reverseengineering.wiki/llms.txt · REWiki:Connect

Technique:Identifying disk and tape images

From ReverseEngineering.wiki
Technique
On this wiki Facts · Code · Notes · Topics

How to tell which format an unknown home-computer disk, flux, snapshot or tape image is: first by the magic bytes at offset 0, then, for headerless raw dumps, by exact file size; every value links to the format page that cites its source.

Step 1: magic bytes

Read the first 16 bytes. If one of these matches, you are done (each row links the page with the source evidence).

Bytes at offset 0 Format Notes
GCR-1541 (47 43 52 2D 31 35 34 31), or GCR-1571 Format:G64 GCR disk image version byte 0 at offset 8
WOZ1 or WOZ2 then FF 0A 0D 0A Format:WOZ disk image Apple II bit stream; 12-byte header, chunks from byte 12
SCP (53 43 50) Format:SCP flux image disk-type byte at offset 4 says the machine
HXCPICFE (HFE v3: HXCHFEV3) Format:HFE image (HxC) 512-byte header
0E 0F Format:Atari ST and MSA disk images (MSA) big-endian 10-byte header; .ST has no magic
ZXTape! 1A (5A 58 54 61 70 65 21 1A) Format:ZX Spectrum TAP and TZX tape images (TZX; also .cdt for the Amstrad CPC) version bytes follow
MV - CPC (standard) or EXTENDED CPC DSK Format:CPC DSK disk image track count at 0x30, sides at 0x31
2IMG (32 49 4D 47) Format:Apple II disk images (DSK, PO, 2IMG) 64-byte header wrapping DOS-order, ProDOS-order or nibble data
96 02 Format:Atari ATR disk image 16-byte header; the sector size at offset 4 must be 128 or 256
1F A6 DE BA CC 13 7D 74 MSX .cas cassette, see Format:MSX DSK disk image#Tape the same 8 bytes also start every block inside the file
44 4F 53 xx ("DOS" + flags) Format:Amiga ADF disk image only on AmigaDOS-formatted disks; non-DOS (game) disks are headerless

Two traps: HFE and G64 both look like "disk" files but hold bit cells, not sectors, so a sector extractor cannot read them directly. A TZX starting with ZXTape! may carry MSX data in TSX block 0x4B.

Step 2: raw images without magic, by exact size

These formats have no header at all, so the file length is the only test. Sizes quoted by the pages are exact; sizes marked (derived) are computed here from the geometry on the page and are not printed in a source.

Size in bytes Candidate Source page
174848 D64, 35 tracks (683 sectors x 256) Format:Commodore D64, D71 and D81 disk images
175531 D64, 35 tracks plus 683 error bytes same
196608 D64, 40 tracks (768 sectors x 256) same
197376 D64, 40 tracks plus 768 error bytes (derived) same
349696 D71 (2 x 683 x 256) same
819200 D81 same
143360 Apple II .dsk/.do/.po, 35 x 16 x 256 Format:Apple II disk images (DSK, PO, 2IMG)
901120 Amiga ADF, DD 80 x 2 x 11 x 512 Format:Amiga ADF disk image
912384 ADF with 81 tracks (accepted by MAME) same
1802240 ADF, HD (22 sectors per track) same
368640 (derived) MSX 360 KiB (40 x 2 x 9 x 512), or an Atari ST 9-sector image of 40 tracks Format:MSX DSK disk image
737280 (derived) MSX 720 KiB (80 x 2 x 9 x 512), or an Atari ST 9-sector 80-track image Format:MSX DSK disk image, Format:Atari ST and MSA disk images
49179 ZX Spectrum .SNA, 48K (27 + 49152) Format:ZX Spectrum Z80 snapshot
131103 or 147487 ZX Spectrum .SNA, 128K same

Atari ST .ST images are 9, 10 or 11 sectors per track, up to 82 tracks, 2 sides, 512 bytes (Format:Atari ST and MSA disk images), so the size is sectors x tracks x 2 x 512, for example 80 x 2 x 9 x 512 = 737280 and 80 x 2 x 11 x 512 = 901120 (derived).

Step 3: sizes that collide

901120 is both an ADF and an ST with 11 sectors per track, and 737280 is both an MSX/PC-style 720 KiB image and an ST 9-sector image. Look inside: an ADF starts with DOS (or is all boot code and a root block at sector 880 with type 2 and secondary type 1, see Format:Amiga ADF disk image), while MSX and ST images have a FAT12 boot sector. For a 143360-byte Apple image the extension (.do or .po) tells the sector order, but a .dsk can be either: test for a DOS 3.3 VTOC at track 17 sector 0 or a ProDOS volume directory in block 2 (Format:Apple II disk images (DSK, PO, 2IMG)).

Step 4: files with no magic and no fixed size

  • .TAP (ZX Spectrum): a chain of little-endian u16 block lengths; walk the chain, and if it ends exactly at the end of the file it is a TAP (libspectrum rejects a truncated length or block, Format:ZX Spectrum TAP and TZX tape images).
  • XFD (Atari 8-bit) is an ATR without its 16-byte header; the sector size must be inferred from the file size (Format:Atari ATR disk image#XFD).
  • If a D64 image is longer than expected by exactly one byte per sector, the extra bytes are an error table, not data.

Why it matters

The format decides what survives: sector images (D64, ADF, ST, DSK) lose copy-protection, which flux and bit-cell images (SCP, HFE, G64, WOZ, extended CPC DSK) keep. When you must pick a reader, pick it by the format that holds the protection you care about.