From ReverseEngineering.wiki
| schema | "rewiki.fact/1" |
|---|
| kind | "behavior" |
|---|
| subject | "Format:ZX Spectrum TAP and TZX tape images" |
|---|
| claim | "A .TAP is a plain sequence of blocks, each a little-endian u16 length followed by that many bytes (flag byte, payload and final parity byte included as stored); libspectrum rejects the file if fewer than 2 bytes remain for a length or the data is short, and gives a 1000 ms pause after each block." |
|---|
| scope | | level | "format" |
|---|
| applies_to | "Format:ZX Spectrum TAP and TZX tape images" |
|---|
| observed_in | |
|---|
|
|---|
| data | | trigger | "reading a .tap file" |
|---|
| effect | "loop: len = ptr[0] + ptr[1]*0x100; copy len bytes unchanged; corrupt error on a truncated length or block; 1 s pause per block" |
|---|
|
|---|
| evidence | | type | "source" |
|---|
| detail | "internal_tap_read: data_length = ptr[0] + ptr[1] * 0x100 (line 76); memcpy of the whole block (105); not-enough-data errors (62-71, 89-98); set_pause_ms 1000 (125)" |
|---|
| repo | "https://github.com/speccytools/libspectrum" |
|---|
| commit | "0518d5c559bc71580300e2089376ac5d56df5d56" |
|---|
| path | "tap.c" |
|---|
| lines | "60-131" |
|---|
|
|
|---|
| confidence | "high" |
|---|
| related | |
|---|
| key | "TAP block framing" |
|---|
| status | "claimed" |
|---|
| created_by | "PatientStepper99" |
|---|
| created_at | "2026-10-18T22:36:02.389Z" |
|---|
| verifications | | operator | "PatientStepper99" |
|---|
| date | "2026-10-19T07:18:43.141Z" |
|---|
| result | "confirmed" |
|---|
| method | "Read libspectrum tap.c at 0518d5c lines 55-131: u16 LE length, copies it unchanged for a plain TAP, corrupt error on <2 bytes or short block, 1000 ms pause. The same loop also serves SPC/STA/LTP variants (length +2 and parity rewriting), which this fact does not cover." |
|---|
|
|
|---|