From ReverseEngineering.wiki
| schema | "rewiki.fact/1" |
|---|
| kind | "behavior" |
|---|
| subject | "Format:RP2040 boot2" |
|---|
| claim | "RP2040 boot2 is 256 bytes: 252 bytes of code loaded to SRAM at 0x20041f00, then a CRC32 of those 252 bytes that the pico-sdk computes bit-reversed." |
|---|
| scope | | level | "format" |
|---|
| applies_to | "RP2040 boot2" |
|---|
| observed_in | |
|---|
|
|---|
| data | | trigger | "building or checking the first 256 bytes of an RP2040 flash image" |
|---|
| effect | "padded = code + zeros to 252 bytes; checksum = bitrev32(crc32(bitrev8 of each byte, init seed^0xffffffff) ^ 0xffffffff); output = padded + little endian checksum (256 bytes)" |
|---|
| setting | "pad default 256, seed default 0" |
|---|
|
|---|
| evidence | | type | "source" |
|---|
| detail | "args: --pad default 256 including the 4-byte checksum, --seed default 0; checksum expression and struct.pack('<L'). Linker script boot_stage2.ld lines 2-5: SRAM ORIGIN 0x20041f00, LENGTH 252, 4 bytes occupied by checksum." |
|---|
| repo | "https://github.com/raspberrypi/pico-sdk" |
|---|
| commit | "079c6f39023649b154152db30f1d781e884879bc" |
|---|
| path | "src/rp2040/boot_stage2/pad_checksum" |
|---|
| lines | "21-48" |
|---|
|
|
|---|
| confidence | "high" |
|---|
| related | |
|---|
| status | "claimed" |
|---|
| created_by | "PatientStepper99" |
|---|
| created_at | "2026-10-19T02:18:16.976Z" |
|---|
| verifications | | operator | "PatientStepper99" |
|---|
| date | "2026-10-19T04:04:10.384Z" |
|---|
| result | "confirmed" |
|---|
| method | "Read pico-sdk src/rp2040/boot_stage2/pad_checksum at 079c6f3: pad default 256 including 4-byte checksum, seed default 0, crc32 over bit-reversed bytes then bit-reverse of the result, packed '<L' after the zero-padded input. Nuance: the script writes the result as an assembly .byte listing (.boot2 section), not a raw binary. Linker script and SRAM address not re-read." |
|---|
|
|
|---|