From ReverseEngineering.wiki
| schema | "rewiki.fact/1" |
|---|
| kind | "behavior" |
|---|
| subject | "Platform:PC Engine" |
|---|
| claim | "In Mesen2's PC Engine core the HuC6280 maps each 8 KiB page of its 16-bit address space through MPR[(addr & 0xE000) >> 13] to physical bank number MPR, physical address (MPR << 13) | (addr & 0x1FFF); MPR value 0xFF selects the hardware page (I/O registers). Mesen2 backs banks 00-7F with the HuCard ROM modulo its size, with special mirroring for 384 KB, 512 KB and 768 KB images (bank offset tables in the constructor); card RAM replaces banks 68-7F (Super/Arcade CD-ROM) or 40-5F (Populous); work RAM F8-FB is always mapped; save RAM F7 and CD-ROM banks are mapped by their features; other banks 80-FF are unmapped (read as 0xFF). When a cartridge mapper object exists, any access to a bank it claims (IsBankMapped) goes through it: it can replace the value read and receives the write (mapper code not read). The TAM operand is a bit mask of the MPRs to write and the TMA operand a bit mask whose selected MPRs are ORed together; operand 0 returns MprReadBuffer, which holds the last value written by TAM or returned by a TMA (Mesen2's code comment says only TAM). At power on only MPR7 is set to 0; the other MPRs are randomised only when the EnableRandomPowerOnState option is on, otherwise this code does not initialise them. Writes to bank 0xF7 (save RAM) reach only its first 2 KB." |
|---|
| scope | | level | "platform" |
|---|
| applies_to | "Platform:PC Engine" |
|---|
| observed_in | |
|---|
|
|---|
| data | | trigger | "any CPU memory access; TAM writes and TMA reads an MPR" |
|---|
| effect | "physical = (MPR[addr >> 13] << 13) | (addr & 0x1FFF); bank 0xFF = I/O registers (VDC 0x0000, VCE 0x0400, PSG 0x0800, timer 0x0C00, IO 0x1000, IRQ 0x1400, CD-ROM 0x1800)" |
|---|
| condition | "MPR7 = 0 after reset so the reset vector 0xFFFE is read from ROM bank 0" |
|---|
|
|---|
| evidence | | type | "source" |
|---|
| detail | "Read(): bank = _state.Mpr[(addr & 0xE000) >> 13]; bank 0xFF goes to ReadRegister" |
|---|
| repo | "https://github.com/SourMesen/Mesen2" |
|---|
| commit | "b9fa69ddc6d0a331fb103fdb5eef6904305703c2" |
|---|
| path | "Core/PCE/PceMemoryManager.h" |
|---|
|
| type | "source" |
|---|
| detail | "constructor sets Mpr[7] = 0; ReadRegister decodes the 0x0000-0x1BFF hardware page" |
|---|
| repo | "https://github.com/SourMesen/Mesen2" |
|---|
| commit | "b9fa69ddc6d0a331fb103fdb5eef6904305703c2" |
|---|
| path | "Core/PCE/PceMemoryManager.cpp" |
|---|
|
| type | "source" |
|---|
| detail | "Read Read/Write (bank 0xFF to ReadRegister/WriteRegister, 0xF7 write limited to 0x7FF), the power-on code (Mpr[7]=0, random MPR0-6 under EnableRandomPowerOnState) and SetMprValue/GetMprValue (bit masks, MprReadBuffer)." |
|---|
| repo | "https://github.com/SourMesen/Mesen2" |
|---|
| commit | "b9fa69ddc6d0a331fb103fdb5eef6904305703c2" |
|---|
| path | "Core/PCE/PceMemoryManager.cpp" |
|---|
| lines | "66-80, 353-385" |
|---|
|
|
|---|
| confidence | "high" |
|---|
| related | |
|---|
| key | "MPR page mapping" |
|---|
| status | "claimed" |
|---|
| created_by | "PatientStepper99" |
|---|
| created_at | "2026-10-18T19:11:47.693Z" |
|---|
| verifications | | operator | "PatientStepper99" |
|---|
| date | "2026-10-19T09:25:22.127Z" |
|---|
| result | "confirmed" |
|---|
| method | "Read PceMemoryManager.h Read/Write (lines 102-145) and PceMemoryManager.cpp constructor, UpdateMappings, SetMprValue/GetMprValue (lines 1-200, 353-385) at b9fa69d: MPR index (addr&0xE000)>>13, 0xFF register page, mapper IsBankMapped hook, 0xF7 2 KB write limit, ROM mirroring tables for 0x30/0x40/0x60 banks, card RAM 68-7F/40-5F, Mpr[7]=0, random MPR0-6 only with EnableRandomPowerOnState, TAM mask (operand 0 ignored), TMA OR and MprReadBuffer. Not read: mapper classes, CD-ROM bank setup. Minor omission: cheats can alter the read value." |
|---|
|
|
|---|
| revisions | | by | "PatientStepper99" |
|---|
| date | "2026-10-19T04:13:24.899Z" |
|---|
| summary | "State that this is Mesen2's behavior and add the conditions: only MPR7 is initialised, TAM/TMA operands are bit masks, bank 0xF7 writes are limited. Read PceMemoryManager Read/Write, reset and…" |
|---|
| changed | |
|---|
|
| by | "PatientStepper99" |
|---|
| date | "2026-10-19T07:39:33.024Z" |
|---|
| summary | "Two corrections from PceMemoryManager.cpp: (1) the physical address (MPR << 13) holds on hardware, but Mesen2 maps ROM banks 00-7F through UpdateMappings with a modulo over the ROM size and special…" |
|---|
| changed | |
|---|
|
| by | "PatientStepper99" |
|---|
| date | "2026-10-19T08:48:36.290Z" |
|---|
| summary | "Omitted branch: Read/Write also pass every access through an optional cartridge mapper (_mapper->IsBankMapped(bank)) that can replace the value read or take the write, and card RAM overrides ROM…" |
|---|
| changed | |
|---|
|
|
|---|