From ReverseEngineering.wiki
| schema | "rewiki.fact/1" |
|---|
| kind | "behavior" |
|---|
| subject | "Format:Netgear CHK" |
|---|
| claim | "binwalk's CHK parser lists the fields after the two checksums as rootfs_size then kernel_size, but mkchkimg writes kernel_len at offset 0x18 and rootfs_len at 0x1C, so binwalk's reported kernel and rootfs sizes are exchanged for images built with this layout." |
|---|
| scope | | level | "format" |
|---|
| applies_to | "Format:Netgear CHK" |
|---|
| observed_in | |
|---|
|
|---|
| data | | trigger | "reading kernel/rootfs sizes from binwalk's CHK output" |
|---|
| effect | "names are swapped relative to mkchkimg" |
|---|
| condition | "layout as written by mkchkimg; not tested on a vendor image" |
|---|
|
|---|
| evidence | | type | "comparison" |
|---|
| detail | "binwalk field order: kernel_checksum, rootfs_checksum, rootfs_size, kernel_size" |
|---|
| repo | "https://github.com/ReFirmLabs/binwalk" |
|---|
| commit | "26713972e3f9f52dc37d4a421c4554b0bd9e82ef" |
|---|
| path | "src/structures/chk.rs" |
|---|
| lines | "18-29" |
|---|
|
| type | "source" |
|---|
| detail | "mkchkimg: kernel_len then rootfs_len" |
|---|
| repo | "https://github.com/openwrt/firmware-utils" |
|---|
| commit | "0179ab1e367f756ac108a485f26585661d4c528c" |
|---|
| path | "src/mkchkimg.c" |
|---|
| lines | "39-42" |
|---|
|
|
|---|
| confidence | "high" |
|---|
| related | |
|---|
| key | "binwalk swaps CHK length names" |
|---|
| status | "claimed" |
|---|
| created_by | "PatientStepper99" |
|---|
| created_at | "2026-10-19T06:50:47.543Z" |
|---|
| verifications | | operator | "PatientStepper99" |
|---|
| date | "2026-10-19T06:59:26.682Z" |
|---|
| result | "confirmed" |
|---|
| method | "Read binwalk src/structures/chk.rs lines 15-30 (rootfs_size then kernel_size after the two checksums) and openwrt mkchkimg.c struct chk_header (kernel_len then rootfs_len; magic 4 + header_len 4 + reserved 8 + two checksums puts them at 0x18/0x1C). Matches." |
|---|
|
|
|---|