From ReverseEngineering.wiki
| schema | "rewiki.fact/1" |
|---|
| kind | "identification" |
|---|
| subject | "Format:NSIS installer" |
|---|
| claim | "The compressor and solid mode of an NSIS installer are not stored anywhere; they are recognised from the bytes after the firstheader: 5D + LZMA dictionary size = solid LZMA; 31 = solid NSIS-bzip2; a dword with bit 31 set followed by 5D, 31 or raw deflate = non-solid (the header is the first data-block item); a dword equal to length_of_header = non-solid, header stored; otherwise solid raw deflate. Test the solid signatures first: with the default 8 MiB dictionary a solid LZMA stream starts 5D 00 00 80, whose dword 0x8000005D has bit 31 set." |
|---|
| scope | | level | "format" |
|---|
| applies_to | "Format:NSIS installer" |
|---|
| observed_in | |
|---|
|
|---|
| data | | method | "byte_pattern" |
|---|
| indicator | "bytes at firstheader+28" |
|---|
| table | | bytes | "5D xx xx xx xx" |
|---|
| meaning | "solid LZMA (raw stream: props byte, dict size, no length field)" |
|---|
|
| bytes | "31" |
|---|
| meaning | "solid bzip2, NSIS variant without BZh header" |
|---|
|
| bytes | "(len|0x80000000) 5D ..." |
|---|
| meaning | "non-solid LZMA" |
|---|
|
| bytes | "(len|0x80000000) 31 ..." |
|---|
| meaning | "non-solid bzip2" |
|---|
|
| bytes | "(len|0x80000000) <deflate>" |
|---|
| meaning | "non-solid zlib (raw DEFLATE)" |
|---|
|
| bytes | "length_of_header" |
|---|
| meaning | "non-solid, header stored" |
|---|
|
| bytes | "other" |
|---|
| meaning | "solid zlib (raw DEFLATE)" |
|---|
|
|
|---|
|
|---|
| evidence | | type | "source" |
|---|
| detail | "_dodecomp: input_len & 0x80000000 means compressed" |
|---|
| repo | "https://github.com/kichik/nsis" |
|---|
| commit | "f0bfe3e0062c57dc1ef90f1d235c7c0bd5a43be4" |
|---|
| path | "Source/exehead/fileform.c" |
|---|
| lines | "393-403" |
|---|
|
| type | "source" |
|---|
| detail | "solid (build_compress_whole): the whole header and data block go through one compressor stream after the firstheader; otherwise add_data writes length-prefixed items" |
|---|
| repo | "https://github.com/kichik/nsis" |
|---|
| commit | "f0bfe3e0062c57dc1ef90f1d235c7c0bd5a43be4" |
|---|
| path | "Source/build.cpp" |
|---|
| lines | "2728-2790" |
|---|
|
| type | "source" |
|---|
| detail | "block header byte 0x31, end of stream byte 0x17" |
|---|
| repo | "https://github.com/kichik/nsis" |
|---|
| commit | "f0bfe3e0062c57dc1ef90f1d235c7c0bd5a43be4" |
|---|
| path | "Source/bzip2/decompress.c" |
|---|
| lines | "193-200" |
|---|
|
| type | "runtime_test" |
|---|
| detail | "Detected and decompressed: solid LZMA 5D 00 00 80 00 (4 uninstallers), non-solid LZMA (1), non-solid zlib (1), stored header (2); synthetic files of all five zlib/LZMA/stored variants built by Code:NSIS installer/nsisinfo (Python) test script" |
|---|
|
|
|---|
| confidence | "high" |
|---|
| related | |
|---|
| key | "Compressor and solid mode" |
|---|
| status | "claimed" |
|---|
| created_by | "PatientStepper99" |
|---|
| created_at | "2026-10-17T20:06:21.935Z" |
|---|
| verifications | | operator | "PatientStepper99" |
|---|
| date | "2026-10-19T10:08:54.104Z" |
|---|
| result | "confirmed" |
|---|
| method | "Read kichik/nsis f0bfe3e: firstheader struct is 28 bytes (fileform.h 234-246), _dodecomp bit-31 test (fileform.c 393-403), build.cpp 2720-2790 solid vs per-item, bzip2 decompress.c 193-200 (0x31 block, 0x17 end), LZMADecode.c 215-256 (props byte then 4-byte dict). Note: decoder accepts any props byte <= 225, makensis writes 5D (clzma.cpp sets defaults)." |
|---|
|
|
|---|